China Standard Auto Hinge Pin Car Parts 500ton Hydraulic Press Fine Blanking cv joint driver side

Product Description

Product Description

Auto hinge pin car parts 500ton hydraulic press fine blanking

We can provide total solutions, including machines, molds, product processing technology, automated production lines. 

Machine parts

 

Product Application

1) Pressing, Forging, Stamping, Powder Compacting, Compressing, Moulding and so on.
2) Cold extrusion molding and stamping for Auto parts, Gears, Eye glass, Cluth, Aluminum case , CV carden joint,
     Terminal Lugs, Sleeves, LED radiator, cellphone case, and hardware tools, etc.
3) Molding and stamping for metallic and non-metallic.

Technical Characteristics

1) Using built-in high speed cylinder, has fast falling speed and high production efficiency.
2) Four columns are made of high-strength alloy steel with hard chrome plated surface and good abrasion resistance.
3) Pressure, stroke and pressurizing time can be adjusted according to processing requirement.
4) Optional configuration: protective cover, anti-drop device, blowing chip removal device, LED lighting and infrared grating, etc
 

Item Unit Specifications
YHA6-300T YHA6-500T YHA6-800T YHA6-1000T
Nominal Force kN 3000 5000 8000 10000
Max.Working Pressure Mpa 24 25 24 24
Master Cylinder Nominal Force kN 3000 5000 8000 10000
Max.Stroke of Ram mm 400 400 500 500
Daylight (Max.Open Height) mm 700 750 900 1200
Upper Ejection Cylinder Force Ton 100 150 150 150
Stroke of Upper Ejection Cylinder mm 50 50 50 50
Lower Ejection Cylinder Force Ton 100 150 150 150
Stroke of lower Ejection Cylinder mm 100 100 100 100
Upper Cushion Cylinder Force Ton 100 100 200 200
Stroke of Upper Cushion Cylinder mm 50 50 50 50
Lower Cushion Cylinder Force Ton 100 100 200 200
Stroke of lower Cushion Cylinder mm 50 50 50 50
Speed of Ram Down No Load mm/s 260 250 200 200
Pressing mm/s 2~15 2~15 2~10 2~10
Return mm/s 230 230 190 190
Effective Area of Working Table RL(Inside Column) mm 550 750 850 1050
FB(Edge) mm 650 800 950 1100
Servo Motor Power kW 16.4 24.5 31 49.6

Components Detail

Packing & Delivery

Packing

Size

Accordingly

Weight

Accordingly

Packaging Details

The normal package is wooden case(Size: L*W*H). The wooden case will be fumigated if needed. If container is too tight, we will use PE film for packing or pack it according to customers’ special request.

Our company

Pre-Sales Service

* Inquiry and consulting support. 
* Sample testing support. 
* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine. 
* Engineers available to service machinery overseas.
 

HangZhou CZPT Hydraulic Machinery Co., Ltd, is experienced in designing and manufacturing various types of
hydraulic press machines and stamping machines,especially specialized in manufacturing servo hydraulic press
machine. The plant is established in 1999 ,covers an area of 5,000 square meters. 
We are strictly implement the ISO9001 , CE, and SGS management standards. 
YIHUI brand presses have been exported to over 30 countries, such as Germany, USA, UK, Sweden, Japan, Slovenia,
Saudi Arabia, El Salvador, Togo, Malaysia, Singapore, Australia ,Vietnam, Pakistan, South Africa, and so on
.Hydraulic
press machine mainly applied tohardware, automotive, die casting, electronic, cookware, paper and other industries.
We can provide total solutions, including machines, molds, product processing technology, automated production lines.
 

Customer shows

Exhibitions

Our advantages

1. Use servo control system with very good quality components.

2. Custom-made is available according to your detailed requirement.

3. We are CZPT to provide whole production line, including molds, technical support and other equipments from
other suppliers.

Certificate

Feedbacks from customer

FAQ
Q1: Are you trade company or manufacturer?
Answer: We are an enterprise with sales, R&D, manufacturing and patent.

Q2: Whether to provide quality assurance and complete after-sales support? Or say, does engineers available to
service overseas?

Answer: Yes!
Warranty period of Our hydraulic press machine is 12 months, if necessary,we support the site installation, 
commissioning, technical guidance,and after-sales maintenance support.

Q3:How can I know what kinds of the machine and which size suits my needs best?
Answer: Before we have a deeper communication on the target machine, the drawings, material, pics, size and production
of the products you are willing to make are necessary.

Q4:Does customized is acceptable?
Answer: Yes, we accept customized when necessary.

Q5:Why choose us ?
Answer: 1.Our factory has specialized in independent development and producing hydraulic press for 20 years.

So the product is stable and with high quality.
2. About machine body, we use bending structure which is much stronger than the common welding structure .
3.About oil pipe, we use Clip-on structure which is tighter than common welding structure and can prevent oil from leakage.
4. We take integrated oil manifold block which is much easier to check and repair machine. 
5.The main components are imported from Japan and ZheJiang . So the quality of our machine is close to Japan
while the unit price is lower than Japan.
6.Our factory can offer full set line service, such as the mould,process technology, and other relative machines.

 

Automatic production line mental fine blanking hydraulic press machinery

Warranty: 24 Months
Feature: Automation, High Efficiency, Precision
Customized: Customized
Condition: New
After-sales Service: Engineers Available to Service Machinery Overseas
Control System: Servo
Customization:
Available

|

Customized Request

cv joint

What Is a CV Joint?

Basically, the constant velocity (CV) joint is a device that transmits power through a drive shaft at a constant rotational speed, without increasing friction. They are mainly used in front-wheel drive vehicles. In addition to transmitting power at a constant rotational speed, these joints also allow the drive shaft to travel at a variable angle. Because of this, they can be used to transmit power through a variety of angles without increasing friction.

Damaged or torn CV boot

Keeping your CV boots in good condition will protect your axle and CV joint from moisture, dust, and other debris. Damaged or torn boots will allow dirt and moisture to enter the joint, increasing the chances of joint failure.
The most obvious symptom of a worn or torn CV boot is a leaking grease reservoir. When your axle rotates, centrifugal force pushes out the exposed grease. This can travel to other parts of your vehicle and cause problems. If the grease is leaking, then you may need to replace your CV boot.
Another symptom of a damaged CV boot is a loose CV joint. This can cause vibrations and a clicking sound. The joint may even make a popping sound when you turn your wheel.
The most important aspect of a CV boot is its ability to protect your CV joint from moisture and debris. Dirt, dust, and road debris are a few of the worst things to enter a joint. These things can damage it over time and lead to more serious problems.
The good news is that a damaged or torn CV boot isn’t too difficult to repair. Most CV boot repair kits come with a tube of grease, which you will need to repack the joint.
If you are unsure about whether you need to replace your CV boot or CV joint, then you should have a professional inspect it. This will help you determine if the joint needs to be replaced or repaired.
You may also want to take your car for a drive to see if you can notice any changes in the sound. This can be due to a loose CV joint or a broken transmission mount.
The best way to tell if your CV boot needs to be replaced is to look for the first sign of wear. This could be the first time you notice a leaking grease reservoir or a crack in your boot. If this is the case, then you need to take your vehicle to a repair shop.

Knocking sound

Having a CV joint makes it possible for your wheels to turn when your suspension moves. This is essential to your vehicle. A CV joint is often used to absorb a high amount of horizontal axis motion.
While you can find CV joints in most modern cars, they can wear out. It’s important to make sure they are in good condition. If they are not, you could end up with a bad joint that could damage other parts of your vehicle.
A CV joint is a critical part of your vehicle, and you need to keep them in good condition. They may not last forever, so you should consider taking them in for repairs if they start making noise.
Often, CV joints make a clunking or knocking noise. This is because the metal parts of the joint are rubbing against each other. Grease is usually used as a lubricant. It helps reduce friction and increases the lifespan of the joint.
If you hear a CV joint clunk or knocking noise while you are turning, it is likely that the joint is worn out. You should be able to find out if it is by turning the steering wheel to the right and left. This will reveal if the joint is broken or not. If it is, the clunking or knocking noise will be louder as you turn.
Usually, the best way to test your CV joint is to take your car to a mechanic. You can also try to shake the joints to determine if they are worn out. You can also try putting your car in reverse and seeing if the noise gets worse.
If the clunk or knocking sound is not as loud as you expect, you may have a bad CV joint. You could also damage the joint by driving the vehicle with a damaged CV joint. This can be dangerous, so you should take all of your precautions when doing this.
Besides clunking and knocking, you may also hear clicking or a popping noise. These are often indicators that the CV joint is worn out, and may need to be replaced.

Vibrations

cv joint
Depending on the type of vehicle you drive, you may have vibrations in your CV joint. A CV joint is an important component of your vehicle that allows your wheels to be steered smoothly. The joint is located at the end of each axle.
A worn CV joint will allow the wheels to shake during acceleration. This can be an indicator of a bad axle, which will need to be replaced. It is also a sign of a tire or wheel runout. If the joint is damaged, you may also hear a clicking noise when turning.
If you experience vibrations in your CV joint, you will want to get them fixed as soon as possible. The joint should be inspected before repairs are made.
A damaged CV joint is typically caused by a tear in the joint boot. If the boot is damaged, water or dirt can enter the joint and eventually destroy the steel balls within the joint. You will also be unable to use ordinary chassis grease to lubricate the joint. You will need to use special high-temperature grease.
A bent rim can also cause harmonic vibrations. If you are overtaking another car, you may hear vibrations that are more noticeable at slower speeds. If you are cruising, you will not hear these vibrations. The best way to get them under control is to turn your wheel straight.
In addition to vibrations, your CV joint may also make a clicking or clunking noise. This noise can be caused by a problem with the driveshaft CV joint or by an improper motor/transmission mount.
CV joints can also become damaged by water, dirt and moisture. If water seeps into the joint, you will need to have the joint replaced. You may also need to replace the CV boot. This will help prevent water and dirt from entering the joint.
If you notice vibrations in your CV joint during acceleration, it is important to get them fixed as soon as possible. This can compromise the safety of you and other drivers on the road.

Dangers of a broken CV joint

cv joint
Having a bad CV joint can be dangerous. Besides the obvious danger of a broken axle, your vehicle may not be safe to drive. Having a bad CV joint can also affect other suspension components, making your car bounce or shake while you drive.
The CV joint is a part of the vehicle’s suspension that allows drivers to control the wheels through the steering wheel. If a CV joint fails, it will be unable to distribute power from the transmission to the wheels. Having a bad CV joint can be hazardous, especially at high speeds. If you suspect that your vehicle has a bad CV joint, it’s best to have it checked immediately.
The first sign of a bad CV joint is an excessive amount of vibration while driving. The more you speed up, the more intense the vibrations will be. A bad CV joint can also cause you to lose control of your vehicle, which can make it difficult to make turns or drive safely.
A loud clicking sound is another common sign of a bad CV joint. The sound is most common during a turn at low speeds, but can also be heard when you accelerate. The click will become louder when the vehicle is turned in a circle.
A clunking sound while decelerating can also be a sign of a bad CV joint. The clunking sound will become louder and more noticeable as the part wears. Having a clunking noise when you turn can be an indication of an inner or outer CV joint failure.
A broken CV joint can leave you stranded and in a dangerous situation. Your car may not move and you may have to tow it. Depending on the location of your vehicle, you may have to replace the entire CV axle, which can be expensive. If you have a broken CV joint, it’s best to have a mechanic inspect it as soon as possible.
A broken CV joint can cause grease to leak into your car, which can cause the tires to wear out faster. It can also cause water and dirt to enter your vehicle.
China Standard Auto Hinge Pin Car Parts 500ton Hydraulic Press Fine Blanking   cv joint driver sideChina Standard Auto Hinge Pin Car Parts 500ton Hydraulic Press Fine Blanking   cv joint driver side
editor by CX 2023-11-24