China for Toyota Yaris Outer CV Joint 43460-59045 4341052070 859137 to-099I cv joint and ball joint

Product Description

Constant Velocity Joint:
Constant Velocity Joint (CV joint) includes a hollow hub on 1 shaft end and a round knob on the other shaft end. The steel balls in each slot transfer power and allow movement in all angles.
SI uses high-grade steel which has a durable performance, OE manufacture quality, can replace the original parts.

Products information of SI CV joint:

Name TOYOTA YARIS Outer CV Joint 43460-59045 859137 TO-099I
Material steel 20 Cr, 20CrMnTi 
Color Original metal color
Application For Toyota
Size External Teeth : 24
Internal Teeth : 23
Seal Diameter : 58 mm
ABS Teeth : 48
Brand SI, CZPT or customized
Packing According to customer
OEM/ODM service Yes
Manufacture place ZHangZhoug, China
MOQ 100 PCS
OEM replacement Yes
Inspection 100%
Warranty 1 year or 40,000-50,000 KM
Certificate ISO9001:2015
Payment T/T, PayPal
Advantage 1. Ultra-high rotation accuracy
2. High strength and good impact resistance
3. Sufficient reliability
4. long working time
5. Good toughness

OEM & Ref.:
TOYOTA : 4341052070
TOYOTA : 4342052070
TOYOTA : 4346059045
TOYOTA : 4347059045
ASHIKA : 62-02-254
ASHUKI : 0846-3412
ASHUKI : TO-099I
ASHUKI : TO-805I
ASHUKI : TO-2098
ASVA : TY-73A48
FEBEST : 0110-035A48
GSP : 859137
GSP : 859152
GSP : 859255

Fit for:
TOYOTA ECHO Saloon 1999-
TOYOTA YARIS (_P1_)  Hatchback 2001-2015
TOYOTA ARIS VERSO (_P2_) MPV 1999-

Related Parts:
 

 

ZheJiang Mighty (SI Bearing)are providing deep groove ball bearing, tapered roller bearing, pillow block bearing, spherical roller bearing, angular contact ball bearing, needle bearing, self-aligning ball bearing, linear bearing, wheel hub bearing, hub unit, clutch release bearing, belt tensioner, etc.

Our auto bearings are mainly used on Ford, Chrysler, Benz, BMW, Audi, FIAT, Seat, I-suzu, Polo, R-enault, P-eugeot, Toyota, Nissan, Santana, Mercedes-Benz, Citroen, V-olvo, Lada, Lancia, Audi, Volkswagen, Honda, O-pel, Daewoo, etc.

 

FAQ:
1. Q: How about your delivery time?
A: If it’s ready stock, it can be sent out immediately. If it has been sold out, we need around 45-60 days to produce.
 

2. Q: What is the packing of the goods?

A: 1. Pack the goods in neutral boxes, put them into the cartons then make a pallet.
   2. Pack in our brand SI, CZPT color box, and then put into the carton & pallet.
   3. According to your requirements, make your designed box after receiving your authorization letters.

3. Q: How can I make an inquiry?
A: You can contact us by email, telephone, WhatsApp, , etc.

4. Q: How long can you reply inquiry?
A: Within 24 hours.

5. Q: What is your shipping logistic?
A: DHL, TNT, FedEx express, by air/sea/train.

6. Q: What’s the MOQ?
A: For the wheel hub bearing repair kit. The MOQ is always 50 sets. If ordering together with other models, a small quantity can be organized. But need more time due to the production schedule.

7. Q: Do you have any guarantee for your products?
A: Yes, all of our products come with a warranty for 12 months for quality.

8. Q: How do you maintain our good business relationship?
A: 1. Keep stable, reliable quality, competitive price to ensure our customer’s benefit;
2. Optimal lead time.
3. Keep customers updating about the new goods.
4. Make customer satisfaction as our main goal.

 

US $5.5-12
/ Piece
|
100 Pieces

(Min. Order)

###

After-sales Service: Yes
Warranty: 12 Month
Type: Drive Shaft Bearing
Material: Chrome Steel
Tolerance: P0
Certification: ISO9001, TS16949

###

Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Name TOYOTA YARIS Outer CV Joint 43460-59045 4341052070 859137 TO-099I
Material steel 20 Cr, 20CrMnTi 
Color Original metal color
Application For Toyota
Size External Teeth : 24
Internal Teeth : 23
Seal Diameter : 58 mm
ABS Teeth : 48
Brand SI, PPB or customized
Packing According to customer
OEM/ODM service Yes
Manufacture place Zhejiang, China
MOQ 100 PCS
OEM replacement Yes
Inspection 100%
Warranty 1 year or 40,000-50,000 KM
Certificate ISO9001:2015
Payment T/T, PayPal
Advantage 1. Ultra-high rotation accuracy
2. High strength and good impact resistance
3. Sufficient reliability
4. long working time
5. Good toughness
US $5.5-12
/ Piece
|
100 Pieces

(Min. Order)

###

After-sales Service: Yes
Warranty: 12 Month
Type: Drive Shaft Bearing
Material: Chrome Steel
Tolerance: P0
Certification: ISO9001, TS16949

###

Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Name TOYOTA YARIS Outer CV Joint 43460-59045 4341052070 859137 TO-099I
Material steel 20 Cr, 20CrMnTi 
Color Original metal color
Application For Toyota
Size External Teeth : 24
Internal Teeth : 23
Seal Diameter : 58 mm
ABS Teeth : 48
Brand SI, PPB or customized
Packing According to customer
OEM/ODM service Yes
Manufacture place Zhejiang, China
MOQ 100 PCS
OEM replacement Yes
Inspection 100%
Warranty 1 year or 40,000-50,000 KM
Certificate ISO9001:2015
Payment T/T, PayPal
Advantage 1. Ultra-high rotation accuracy
2. High strength and good impact resistance
3. Sufficient reliability
4. long working time
5. Good toughness

Causes and Symptoms of a Bad CV Joint

Having a bad cv joint can be a very common problem, but there are steps you can take to prevent and treat it. This article will discuss the causes of a bad cv joint, the symptoms you can expect, and what you can do to fix it.

Symptoms of a bad cv joint

cv joint
Symptoms of a bad CV joint include excessive vibration, noise, and loss of alignment. A bad CV joint will limit the performance of your vehicle and may require the replacement of the entire CV axle. If you are experiencing any of these symptoms, you should get your car checked by a professional.
The most common symptom of a bad CV joint is a clicking or popping noise when you turn the steering wheel. You can also hear a “clunk” sound when you decelerate or accelerate. The noise will get louder with each mile you drive.
Another symptom is a loss of power or the transmission slippage. If you are experiencing these symptoms, you should check your transmission fluid level. If it is low, you may need to add transmission fluid. Then, test the drivetrain in reverse to see if you can detect the clunk or clicking noise.
If you notice a loud knocking noise, you may have a bad CV joint. This noise may get worse as you drive and it will become more noticeable when you make a sharp turn. You may also notice that grease accumulates on the rim and the interior of the tire. If you see these signs, you need to get your car checked by a mechanic.
Another symptom of a bad CV joint is that you may notice a loss of transmission fluid. This can be caused by a leak in the transmission fluid filter. The fluid will overheat and the transmission may not work properly. You should also look for displaced grease. If you see grease on the rim or tire, it is probably the cv joint.
If you notice a clicking or popping noise when you turn the steering wheel, it is a sign that the outer or inner CV joint is damaged. You may also notice a darker color of grease on the rim or wheel interior. If you notice this, you may need to replace the CV boot.
A bad CV joint can be very dangerous if not detected early. If you do not get your car checked by a mechanic, you may end up in a dangerous situation.

Common causes of a bad cv joint

Having bad CV joints can cause a number of problems. They can make driving unsafe, uncomfortable, and difficult. They can also cause dirt and moisture to get into the CV joint, which can wear the joint out quicker.
These joints are a vital part of a vehicle’s suspension system. They work to help transfer power from one wheel to the next, and are found in front-wheel drive and rear-wheel drive vehicles. They are located in a number of different places in a vehicle, so it’s important to know how to identify them.
When a CV joint is worn out, it can start to cause a loud clunk noise. This is usually heard when the vehicle is accelerating or turning. When a joint starts to wear out, the vibration caused by the joints is increased, which is why the noise becomes louder as the vehicle accelerates or turns.
If you notice the clunk noise, it’s important to get it repaired as soon as possible. This will help you save money and avoid unsafe situations. In some cases, it may be necessary to replace the entire CV axle.
Other common causes of a bad CV joint are a torn boot, excessive wear, and leakage. The torn boot may cause dirt and moisture to enter the joint, which will wear it out quicker. Also, the boot may be damaged, which can cause grease to leak out, which can affect various parts of the vehicle.
Bad CV joints may also cause a banging or popping noise when the vehicle is turning. This can occur in sharp turns at low speeds. If you hear this noise while driving, you may need to get it repaired.
Another common symptom of a bad CV joint is a loud clunk sound when the car is decelerating. This may indicate a u-joint or transaxle failure.
The best way to determine if a joint is bad is to have it checked out by a mechanic. They can help you identify the problem and recommend the right way to fix it. A broken joint can cause a variety of problems, so it’s important to get it fixed as soon as possible.

Repairing a bad cv joint

cv joint
Having a bad CV joint can lead to serious damage to your vehicle. This can include a bouncy ride, loss of control, and even a broken axle. If you notice these symptoms, you should have your CV joint repaired as soon as possible.
A CV joint is a crucial part of your car. It transfers torque from the transmission to the wheels. This joint has to be lubricated with grease and oil to keep it in good shape. If the grease inside the joint gets dirty, it will eventually wear out.
The best way to avoid CV joint failure is to check your car for signs of wear and tear. If you notice small cracks on your tires or wheels, you may have a leaking joint. Having a leaking joint will cause more friction and will further damage the joint.
Another sign of a bad CV joint is a popping noise. Most front wheel drive cars don’t make popping noises, but some will. If you hear a popping noise when you drive, your CV joint is close to the end of its life.
If you’re noticing signs of wear and tear on your CV joint, take it to a reputable auto repair shop for a diagnosis. Typically, this will involve removing the suspension assembly, and replacing the CV joint. It’s important to keep in mind that the cost of replacing a CV joint can vary greatly from shop to shop.
You should also shop around for an estimate. You might be able to save money on CV joint replacement if you purchase an aftermarket part. You should also look into the warranty of the part you’re purchasing. Some aftermarket parts aren’t of the best quality, so it’s important to know exactly what you’re buying.
You should also take your car out for a test drive if you’re noticing signs of CV joint damage. If you notice a clunking noise on deceleration, or a bouncy ride when you’re accelerating through curves, you should take your car for a test drive. If you’re not sure how to test your CV joint, you should ask your mechanic for advice.

Preventing a bad cv joint

cv joint
Having a bad CV joint can be very dangerous. They can cause problems with the transmission and tires. It is best to check for signs of a CV joint problem before it causes problems with your car.
When you hear a clicking sound when turning, it is a sign that a CV joint is worn out. The noise gets worse when you accelerate. It is best to have a professional look at the problem. If you are having problems with your vehicle’s transmission, it is best to take it to a mechanic.
If you have a manual transmission, it can be difficult to operate. The clicking sound gets louder as you accelerate. It can be difficult to drive in stop and go traffic with a manual transmission.
The clicking sound is also heard when you make a sudden turn. This can be a sign that the outer CV joint is worn out. If the CV joint is damaged, the shaft may shear. The outer CV joint is located at the end of the driveshaft.
CV joints are complex mechanisms. They can get hot due to internal friction. They are also prone to heat expansion. This is due to the heat that is transferred from the engine and brakes. This can cause the grease in the joint to expand. This is why it is important to lubricate your CV joint.
If you notice a leak, it is important to repair the problem. A leak can also cause dirt to enter the joint. This can cause corrosion. It is also important to clean the CV joint. Keeping the car clean can help extend the life of the joint.
The lifespan of a CV joint can vary by make and model of vehicle. Typical CV joints last between 80,000 and 100,000 miles. Depending on the make and model of your car, the cost of replacing a CV joint can range from $200 to $400.
If you suspect that you may have a bad CV joint, it is best to have it checked out by a professional. A professional can also tell you if you need to have the joint replaced.
China for Toyota Yaris Outer CV Joint 43460-59045 4341052070 859137 to-099I     cv joint and ball jointChina for Toyota Yaris Outer CV Joint 43460-59045 4341052070 859137 to-099I     cv joint and ball joint
editor by czh 2022-12-02